Chant Engineering, Inc. Click for English Site Haga clic aqui para Espanol
  • Products and Services
  • Engineering Staff
  • Prooftest Machines
    • Horizontal
    • Vertical
    • Mobile
    • Custom
    • Pre-Stretch Beds
    • Break Testing Machines
  • Datatest Software
  • Prooftest Upgrades
  • Prooftest Options
    • Low Load Cylinder
    • Elongation
    • Cycling Controls
  • Calibration
  • Wire Rope Grips
  • Test Stands
    • Servo Valve
    • Servo Valve Torque Motor
    • Hydraulic Pump
    • Universal Hydraulic
    • Helicopter Cargo Hook
    • Fatigue and Static
    • Fuel Flow
    • F-15 Speed Calibration
    • M88A2 Advance Unit
    • Pneumatic
  • Test Cell Manufacturing
    • US Army Abrams
    • Helicopter Whirl Tower
    • C17-C130 Airdrop
  • Testing Machines
    • Tri-axial
    • Compression
    • Torque
    • Hydrostatic
    • Tire Testing
    • Package
    • Transportation Simulators
    • Hurricane Simulators
  • Civil Works Equipment
  • Wave Simulators
  • Government
  • Flushing Valves
  • Associations
  • Testing Service Links
Home | About Us | News | Testimonials | Contact Us

Prooftest Machines : Break Testing Machines

Chant Engineering Break Test Machines are used by wire rope manufacturers to break test wire rope specimens during the manufacturing process. For quality control and verification it is necessary for wire rope manufacturers to break test samples of their products to ensure the breaking force is within their published specifications.

Typically a manufacturer wants to break a relatively short length of product in the least amount of time possible. The Chant Break Test Machine accomplishes this, with as little waste product as possible. The wire rope sample can be as short as 6 feet. The ends are broomed out and cast in a cone shape with fiberglass resin. This is a very fast and cost effective way to manufacturer a termination on a rope sample.

Chant provides tooling with the machine to match the various cone shapes. In use, the operator selects the tooling to match the specimen and the sample is loaded into the machine. From the touch screen control the operator selects the loading force or break testing force.

The machine will automatically go to the set load or will go fully to break. There is complete data acquisition; each test is stored in the computer and can be reviewed at any time or a certificate can be printed. Elongation is also recorded.

Chant break test machines come in a variety of capacities. Each machine is custom made to order: any capacity, width, height and lengths are available.

Contact sales@chantengineering.com for more information.

Proof Test Page Links:
Horizontal | Vertical | Mobile Machines | Custom | Pre-stretch Beds | Break Testing

Home | About Us | Engineering Staff | Test Machines | Prooftest Machines | Civil Works Equipment | Government | Contact Us | Sitemap

Copyright © 2010 Chant Engineering Co. Inc.
Website Design & Hosting By Next Generation Web Technologies